ASP FSO文件操作函數代碼（復制文件、重命名文件

FSO文件（File）對象屬性
DateCreated 返回該文件夾的創(chuàng )建日期和時間
DateLastAccessed 返回最后一次訪問該文件的日期和時間
DateLastModified 返回最后一次修改該文件的日期和時間
Drive 返回該文件所在的驅動器的Drive對象
Name 設定或返回文件的名字
ParentFolder 返回該文件的父文件夾的Folder對象
Path 返回文件的絕對路徑，可使用長文件名
ShortName 返回DOS風格的8.3形式的文件名
ShortPath 返回DOS風格的8.3形式的文件絕對路徑
Size 返回該文件的大?。ㄗ止潱?
Type 如果可能，返回一個文件類型的說明字符串
FSO文件（File）對象方法
FSO文件對象方法 用途
CopyFile 拷貝一個或者多個文件到新路徑
CreateTextFile 創(chuàng )建文件并且返回一個TextStream對象
DeleteFile 刪除一個文件
OpenTextFile 打開文件并且返回TextStream對象，以便讀取或者追加

文件操作，取文件大小

Function GetFileSize(FileName)  
'//功能：取文件大小  
'//形參：文件名  
'//返回值：成功為文件大小，失敗為-1  
'//  
FPath=server.mappath("jinmozhe.rar") '本地文件地址
Set fso = CreateObject("scripting.FileSystemObject")
Set f = fso.GetFile(FPath)
size=f.size
if len(size)>4 then
    response.write formatnumber(f.size/1024000,2)&"MB"
else
   response.write formatnumber(f.size/1024,2)&"KB"
end if

重命名文件：

Function reName(sourceName,destName) 
dim oFso,oFile 
set oFso=server.createobject("Scripting.FileSystemObject") 
set oFile=oFso.getFile(Server.mappath(sourceName)) 
oFile.Name=destName 
Set oFso=Nothing 
Set oFile=Nothing 
End Function 

刪除文件：

Function FSOdel(fileName) 
dim fso,f 
set fso = server.CreateObject("scripting.filesystemobject") 
f=server.MapPath(fileName) 
if fso.FileExists(f) then 
fso.DeleteFile f,true 
end if 
set f = nothing 
set fso = nothing 
End Function 

替換文件中的字符串:

Function FSOreplace(fileName,Target,repString) 
Dim objFSO,objCountFile,FiletempData 
Set objFSO = Server.CreateObject("Scripting.FileSystemObject") 
Set objCountFile = objFSO.OpenTextFile(Server.MapPath(fileName),1,True) 
FiletempData = objCountFile.ReadAll 
objCountFile.Close 
FiletempData=Replace(FiletempData,Target,repString) 
Set objCountFile=objFSO.CreateTextFile(Server.MapPath(fileName),True) 
objCountFile.Write FiletempData 
objCountFile.Close 
Set objCountFile=Nothing 
Set objFSO = Nothing 
End Function 

創(chuàng )建目錄

<% 
'******************************************************* 
'函數名：CreateFolder(sPath) 
'作 用: 創(chuàng  )建目錄 
'參 數：sPath : 創(chuàng  )建的相對目錄路徑 
'返回值：成功 true , 失敗 false 
'******************************************************* 
'response.Write createfolder("/dgsunshine/UploadFile/demo1/") 
Function CreateFolder(sPath) 
On Error Resume Next 

Dim Fso,Arrfolder,Folder,i,j 

If sPath="" then 
CreateFolder = False 
Exit Function 
End If 

If Left(sPath,1) = "/" Then 
Folder = "/" 
sPath = Mid(sPath,2,Len(sPath)) 
Else 
Folder = "./" 
End If 

if Right(sPath,1) = "/" then sPath = Left(sPath,Len(sPath)-1) 

ArrFolder = Split(sPath,"/") 

Set Fso = Server.CreateObject("Scripting.FileSystemObject") 

For i = 0 To Ubound(ArrFolder) 
If i = 0 then 
Folder = Folder & ArrFolder(i) & "/" 
Else 
Folder = Folder & ArrFolder(i) & "/" 
End If 

If Fso.folderExists(Server.MapPath(Folder)) = False then 
response.Write server.MapPath(folder) 
Fso.createFolder(Server.MapPath(Folder)) 
End If 

Next 
Set Fso = nothing 

If Err.Number <> 0 then 
Err.clear() 
CreateFolder = False 
Else 
CreateFolder = True 
End If 
End function 

創(chuàng )建目錄再給兩個函數

<%
 Function CreateMultiFolder(ByVal CFolder) 
        Dim objFSO, PhCreateFolder, CreateFolderArray, CreateFolder 
        Dim i, ii, CreateFolderSub, PhCreateFolderSub, BlInfo 
        BlInfo = False 
        CreateFolder = CFolder 
        On Error Resume Next 
        Set objFSO = Server.CreateObject("Scripting.FileSystemObject") 
        If Err Then 
            Err.Clear() 
            Exit Function 
        End If 
        If Right(CreateFolder, 1) = "/" Then 
            CreateFolder = Left(CreateFolder, Len(CreateFolder) -1) 
        End If 
        CreateFolderArray = Split(CreateFolder, "/") 
        For i = 0 To UBound(CreateFolderArray) 
            CreateFolderSub = "" 
            For ii = 0 To i 
                CreateFolderSub = CreateFolderSub & CreateFolderArray(ii) & "/" 
            Next 
            PhCreateFolderSub = Server.MapPath(CreateFolderSub) 
            If Not objFSO.FolderExists(PhCreateFolderSub) Then 
                objFSO.CreateFolder(PhCreateFolderSub) 
            End If 
        Next 
        If Err Then 
            Err.Clear() 
        Else 
            BlInfo = True 
        End If 
        CreateMultiFolder = BlInfo 
End Function
'自動創(chuàng  )建多極目錄
'code by jb51 reterry
function createit(path)
dim fsofo,cinfo,thepath,thepatharray
dim i,ii,binfo
binfo=false
thepath=path
set fsofo=createobject("scripting.filesystemobject")
if err then
err.clear
exit function
end if
thepath=replace(thepath,"\","/")
if left(thepath,1)="/" then
thepath=right(thepath,len(thepath)-1)
end if
if right(thepath,1)="/" then
thepath=left(thepath,len(thepath)-1)
end if
thepatharray=split(thepath,"/")
for i=0 to ubound(thepatharray)
createfoldersub1=createfoldersub1&thepatharray(i)&"/"
createfoldersub=server.mappath(createfoldersub1)
if not fsofo.folderexists(createfoldersub) then
fsofo.createfolder(createfoldersub)
end if
next
if err then
err.clear
else
binfo=true
end if
createit=binfo
end function

createit("/202004/tools/")
%>

讀取文件內容

Function getFile(paramFilePath) 
Set Fso = Server.CreateObject("Scripting.FileSystemObject") 
Set Fso_Read = fso.OpenTextFile(Server.MapPath(paramFilePath),1,false,-2) 
getFile = Fso_Read.readall 
Set Fso_Read = Nothing 
Set Fso = Nothing 
End Function 

創(chuàng )建文件

'******************************************************* 
'函數名：CreateFile(paramFileContent,paramFilePath) 
'作 用: 創(chuàng  )建文件 
'參 數：paramFileContent '文件的內容 
' paramFilePath '文件名(不包括路徑) 
'返回值：成功 true , 失敗 false 
'******************************************************* 
Function CreateFile(paramFileContent,paramFilePath) 
On Error Resume Next 
Dim Fso,fWrite 

Set Fso = Server.CreateObject("Scripting.FileSystemObject") 
Set fWrite = Fso.CreateTextFile(Server.Mappath(paramFilePath),true) 

fWrite.write paramFileContent 
fWrite.close() 
Set fWrite = nothing 
Set Fso = nothing 

If Err.number <> 0 Then 
Err.clear() 
CreateFile = False 
Else 
CreateFile = True 
End If 
End Function 

刪除文件 支持多文件

'******************************************************* 
'函數名：DelFile(FilePath) 
'作 用: 刪除文件 
'參 數：FilePath '文件路徑 多個文件用"|"隔開 
'返回值：成功 true , 失敗 false 
'******************************************************* 
Function DelFile(FilePath) 
On Error Resume Next 
Dim fso,arrFile,i 

If GetSafeStr(FilePath,"")="" then 
CreateFolder = false 
Exit Function 
End If 

arrFile = Split(FilePath,"|") 
Set Fso = Server.CreateObject("Scripting.FileSystemObject") 

for i=0 to UBound(arrFile) 
FilePath = arrFile(i) 
If Fso.FileExists(Server.MapPath(FilePath)) then 
Fso.DeleteFile Server.MapPath(FilePath) 
End If 
Next 
Set fso = nothing 

If Err then 
Err.clear() 
DelFile = false 
Else 
DelFile = true 
End If 
End Function

 刪除目錄

'******************************************************* 
'函數名：DelFolder(FolderPath) 
'作 用: 刪除目錄 
'參 數：FolderPath '目錄路徑 '多個目錄用"|"分隔 
'返回值：成功 true , 失敗 false 
'******************************************************* 
Function DelFolder(FolderPath) 
On Error Resume Next 
Dim Fso,arrFolder,i 

If GetSafeStr(FolderPath,"")="" then 
DelFolder = false 
Exit Function 
End If 

arrFolder = Split(FolderPath,"|") 
Set Fso = Server.CreateObject("Scripting.FileSystemObject") 

For i=0 to UBound(arrFolder) 
FolderPath = arrFolder(i) 
If Fso.folderexists(Server.MapPath(FolderPath)) then 
Fso.deleteFolder Server.MapPath(FolderPath) 
End If 
Next 

If Err then 
Err.clear() 
DelFolder = false 
'ShowError "刪除目錄失敗","" 
else 
DelFolder = true 
End If 
End Function 

為了方便，還是下面都一起把大家根據需要復制即可

'******************************************************* 
'函數名：IsExistFile(FilePath) 
'作 用: 判斷文件或目錄是否存在 
'參 數：FilePath '文件路徑 多個文件用"|"隔開 
'返回值：成功 true , 失敗 false 
'******************************************************* 
Function IsExistFile(FilePath) 
On Error Resume Next 
Dim fso,arrFile,i 

If GetSafeStr(FilePath,"")="" then 
IsExistFile = false 
End If 

arrFile = Split(FilePath,"|") 
Set Fso = Server.CreateObject("Scripting.FileSystemObject") 

for i=0 to UBound(arrFile) 
FilePath = arrFile(i) 
If Fso.FileExists(Server.MapPath(FilePath)) then 
IsExistFile = True 
End If 
If Fso.folderexists(Server.MapPath(FilePath)) then 
IsExistFile = True 
End If 
Next 
Set fso = nothing 

If Err then 
Err.clear() 
IsExistFile = false 
'ShowError "判斷文件或目錄是否存在失敗","" 
else 
IsExistFile = true 
End If 
End Function 


'******************************************************* 
'函數名：DelFile(FilePath) 
'作 用: 刪除文件或目錄 
'參 數：FilePath '文件路徑 多個文件用"|"隔開 
'返回值：成功 true , 失敗 false 
'******************************************************* 
Function DelFile(FilePath) 
On Error Resume Next 
Dim fso,arrFile,i 

If GetSafeStr(FilePath,"")="" then 
CreateFolder = false 
End If 

arrFile = Split(FilePath,"|") 
Set Fso = Server.CreateObject("Scripting.FileSystemObject") 

for i=0 to UBound(arrFile) 
FilePath = arrFile(i) 
If Fso.FileExists(Server.MapPath(FilePath)) then 
Fso.DeleteFile Server.MapPath(FilePath) 
End If 
If Fso.folderexists(Server.MapPath(FilePath)) then 
Fso.deleteFolder Server.MapPath(FilePath) 
End If 
Next 
Set fso = nothing 

If Err then 
Err.clear() 
DelFile = false 
'ShowError "刪除文件或目錄失敗","" 
else 
DelFile = true 
End If 
End Function 


'******************************************************* 
'函數名：ReNameFile((oldName,newName) 
'作 用: 重命名文件或目錄 
'參 數：strOldName '原文件名 多個用"|"隔開 
' strNewName '新文件名 多個用"|"隔開 
' 上面兩個參數請保持一致 
'返回值：成功 true , 失敗 false 
'******************************************************* 
Function ReNameFile(strOldName,strNewName) 
On Error Resume Next 
Dim fso,arrOld,arrNew,i,oldName,newName 

old = GetSafeStr(strOldName,"") 
Newfile = GetSafeStr(strNewName,"") 

If old ="" or Newfile = "" then 
ReNameFile = false 
Exit Function 
End If 

arrOld = Split(strOldName,"|") 
arrNew = Split(strNewName,"|") 

If UBound(arrOld)<> UBound(arrNew) then 
ReNameFile = false 
Exit Function 
End If 

Set Fso = Server.CreateObject("Scripting.FileSystemObject") 
for i=0 to UBound(arrOld) 
oldName = Server.MapPath(arrOld(i)) 
newName = Server.MapPath(arrNew(i)) 
If Fso.FileExists(oldName) and not Fso.FileExists(newName) then 
fso.MoveFile oldName,newName 
'ReNameFile = True 
End If 
Next 
Set fso = nothing 

If Err.Number <> 0 Then 
Err.clear() 
ReNameFile = false 
Else 
ReNameFile = True 
End If 
End Function 


'******************************************************* 
'函數名：CopyFiles((TempSource,TempEnd) 
'作 用: 復制文件或者目錄 
'參 數：TempSource '源文件名 多個用"|"隔開 
' TempEnd '目的文件名 多個用"|"隔開 
' 注意：上面兩個參數請保持一致，并且都為完整路徑， 
' 已經經過Server.MapPath方法處理過 
'返回值：成功 true , 失敗 false 
'******************************************************* 
Function CopyFiles(TempSource,TempEnd) 
On Error Resume Next 
Dim CopyFSO,arrSource,arrEnd 

CopyFiles = false 
Set CopyFSO = Server.CreateObject("Scripting.FileSystemObject") 

If TempSource ="" or TempEnd = "" then 
ErrRaise "復制文件或目錄","條件為空" 
CopyFiles = false 
Exit Function 
End If 

arrSource = Split(TempSource,"|") 
arrEnd = Split(TempEnd,"|") 
If UBound(arrSource) <> UBound(arrEnd) then 
CopyFiles= false 
Exit Function 
End If 

for i=0 to UBound(arrSource) 
srcName = arrSource(i) 
tarName = arrEnd(i) 
IF CopyFSO.FileExists(srcName) and not CopyFSO.FileExists(tarName) then 
CopyFSO.CopyFile srcName,tarName 
CopyFiles = true 
End If 

IF CopyFSO.FolderExists(srcName) and not CopyFSO.FolderExists(tarName)then 
CopyFSO.CopyFolder srcName,tarName 
CopyFiles = true 
End If 
Next 
Set CopyFSO = Nothing 

If Err then 
'Err.clear() 
CopyFiles = false 
End If 
End Function 
%> 

接著分享幾個

<%
Server.execute("redirect.asp")
username=session("username")
Dim SourceFile,TargetFile
SourceFile = "test\xx.txt"
TargetFile = "test\xx" 
TargetFile = TargetFile & "_" & username & ".txt"
' 文件已存在則先刪除
If IsExistFile(TargetFile) then
call DelFile(TargetFile)
End If 
' 複製文件
call CopyFiles(SourceFile,TargetFile)

'*******************************************************
'函數名：CopyFiles((TempSource,TempEnd)
'作 用：複製檔或者目錄
'參 數：TempSource '原始檔案名 多個用"|"隔開
' TempEnd '目的檔案名 多個用"|"隔開?
'注意：上面兩個參數請保持一致，文件路徑為相對路徑
'已經經過Server.MapPath方法處理過
'返回值：成功 true , 失敗 false
'*******************************************************
Function CopyFiles(TempSource,TempEnd)
On Error Resume Next
Dim CopyFSO,arrSource,arrEnd

CopyFiles = false
Set CopyFSO = Server.CreateObject("Scripting.FileSystemObject")

If TempSource ="" or TempEnd = "" then
ErrRaise "複製文件或目錄","條件為空"
CopyFiles = false
Exit Function
End If

arrSource = Split(TempSource,"|")
arrEnd = Split(TempEnd,"|")
If UBound(arrSource) <> UBound(arrEnd) then
CopyFiles= false
Exit Function
End If

for i=0 to UBound(arrSource)
srcName = arrSource(i)
tarName = arrEnd(i)

IF CopyFSO.FileExists(Server.MapPath(srcName)) and not CopyFSO.FileExists(Server.MapPath(tarName)) then
CopyFSO.CopyFile Server.MapPath(srcName),Server.MapPath(tarName)
CopyFiles = true
End If

IF CopyFSO.FolderExists(Server.MapPath(srcName)) and not CopyFSO.FolderExists(Server.MapPath(tarName))then
CopyFSO.CopyFolder Server.MapPath(srcName),Server.MapPath(tarName)
CopyFiles = true
End If
Next
Set CopyFSO = Nothing

If Err then 
'Err.clear()
CopyFiles = false
End If
End Function

'*******************************************************
'函數名：IsExistFile(FilePath)
'作 用： 判斷文件或目錄是否存在
'參 數：FilePath '檔路徑 多個檔用"|"隔開
'返回值：成功 true , 失敗 false
'*******************************************************
Function IsExistFile(FilePath)
On Error Resume Next
Dim fso,arrFile,i

If FilePath="" then
IsExistFile = false
End If

arrFile = Split(FilePath,"|")
Set Fso = Server.CreateObject("Scripting.FileSystemObject") 

for i=0 to UBound(arrFile)
FilePath = arrFile(i)
If Fso.FileExists(Server.MapPath(FilePath)) then
IsExistFile = True
End If
If Fso.folderexists(Server.MapPath(FilePath)) then
IsExistFile = True
End If
Next
Set fso = nothing

If Err then 
Err.clear()
IsExistFile = false
'ShowError "判斷文件或目錄是否存在失敗",""
else
IsExistFile = true
End If
End Function

'*******************************************************
'函數名：DelFile(FilePath)
'作 用: 刪除檔或目錄
'參 數：FilePath '檔路徑 多個檔用"|"隔開
'返回值：成功 true , 失敗 false
'*******************************************************
Function DelFile(FilePath)
On Error Resume Next
Dim Fso,arrFile,i

If FilePath="" then
CreateFolder = false
End If

arrFile = Split(FilePath,"|")
Set Fso = Server.CreateObject("Scripting.FileSystemObject")

for i=0 to UBound(arrFile)
FilePath = arrFile(i)
If Fso.FileExists(Server.MapPath(FilePath)) then
Fso.DeleteFile(Server.MapPath(FilePath))
End If
If Fso.folderexists(Server.MapPath(FilePath)) then
Fso.deleteFolder(Server.MapPath(FilePath))
End If
Next
Set Fso = nothing

If Err then 
Err.clear()
DelFile = false
'ShowError "刪除文件或目錄失敗",""
else
DelFile = true
End If
End Function
%>

到此這篇關于A(yíng)SP FSO文件操作函數代碼（復制文件、重命名文件、刪除文件、替換字符串）的文章就介紹到這了,更多相關FSO 文件操作內容請搜索腳本之家以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持腳本之家！