本篇內容主要講解“+keepalived的安裝配置方法”，感興趣的朋友不妨來看看。本文介紹的方法操作簡單快捷，實用性強。下面就讓小編來帶大家學習“mysql+keepalived的安裝配置方法”吧!
注意：keepalived在每一臺的上都需要安裝
環境介紹：
master_mysql: 10.20.20.51
slave_mysql : 10.20.20.61
virtual_ip : 10.20.20.201
注意：關閉防火墻、selinux
一、安裝keepalived
下載地址：
1、 http://www.keepalived.org/software/keepalived-1.1.20.tar.gz
3、安裝C編譯器
yum install popt-devel openssl-devel popt-devel
yum install gcc gcc-c++ autoconf automake
4、編譯安裝
[root@node1 ~]# tar zxvf keepalived-1.2.13.tar.gz
[root@node1 keepalived-1.2.13]# cd keepalived-1.2.13
[root@node1 keepalived-1.2.13]# ./configure --prefix=/usr/local/keepalived --disable-fwmark
[root@node1 keepalived-1.2.13]# make
[root@node1 keepalived-1.2.13]# make install
[root@node1 keepalived-1.2.13]# cp /usr/local/keepalived/sbin/keepalived /usr/sbin/
[root@node1 keepalived-1.2.13]# cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
[root@node1 keepalived-1.2.13]# cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/
[root@node1 keepalived-1.2.13]# cd /etc/init.d/
[root@node1 init.d]# chkconfig --add keepalived
[root@node1 init.d]# chkconfig keepalived on
[root@node1 init.d]# mkdir -p /etc/keepalived
5、配置keepalived文件
1）主庫的keepalived配置文件
vim /etc/keepalived/keepalived.conf
global_defs {
router_id Hadb_1
}
vrrp_sync_group VGM {
group {
VI_HA
}
}
vrrp_script chk_mysql {
script "
interval 1
}
# vvrp_instance define #
vrrp_instance VI_HA {
state MASTER
interface eth0
virtual_router_id 54
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass hamysql
}
virtual_ipaddress {
10.20.20.201
}
track_script {
chk_mysql
}
}
2）從庫的keepalived的配置文件
vim /etc/keepalived/keepalived.conf
global_defs {
router_id Hadb_1
}
vrrp_sync_group VGM {
group {
VI_HA
}
}
vrrp_script chk_mysql {
script "
interval 1
}
# vvrp_instance define #
vrrp_instance VI_HA {
state BACKUP
interface eth0
virtual_router_id 54
priority 50
advert_int 1
authentication {
auth_type PASS
auth_pass hamysql
}
virtual_ipaddress {
10.20.20.201
}
track_script {
chk_mysql
}
}
6、啟動keepalived服務
service keepalived start
二、配置mysql的AB復制（互相的AB復制）
1、1.主庫配置（master服務器）
#vi /etc/my.cnf
[mysqld]
log-bin=mysql-bin //[必須]啟用二進制日志
server-id=51 //[必須]服務器唯一ID，默認是1，一般取IP最后一段
2.修改從服務器slave:
#vi /etc/my.cnf
[mysqld]
log-bin=mysql-bin //[必須]啟用二進制日志
server-id=61 //[必須]服務器唯一ID，默認是1，一般取IP最后一段
3、重啟兩臺服務器的mysql
/etc/init.d/mysql restart
4、在主服務器上建立帳戶并授權slave:
10.20.20.51：
mysql>GRANT REPLICATION SLAVE ON *.* to 'repler'@'%' identified by '123.com';
10.20.20.61：
mysql>GRANT REPLICATION SLAVE ON *.* to 'repler'@'%' identified by '123.com';
5、登錄主服務器的mysql，查詢master的狀態
mysql>show master status;
+------------------+----------+--------------+------------------+
| File | Position | Binlog_Do_DB | Binlog_Ignore_DB |
+------------------+----------+--------------+------------------+
| mysql-bin.000004 | 308 | | |
+------------------+----------+--------------+------------------+
6、配置從服務器Slave：
10.20.20.61：
mysql>change master to master_host='10.20.20.51',master_user='repler',master_password='123.com',
master_log_file='mysql-bin.000004',master_log_pos=308;
10.20.20.51：
mysql>change master to master_host='10.20.20.61',master_user='repler',master_password='123.com',
master_log_file='mysql-bin.000004',master_log_pos=308;
7、啟動從服務器復制功能
mysql>start slave;
8、檢查從服務器復制功能狀態：
mysql> show slave status\G
免責聲明：本站發布的內容（圖片、視頻和文字）以原創(chuàng )、來自本網站內容采集于網絡(luò )互聯網轉載等其它媒體和分享為主，內容觀點不代表本網站立場，如侵犯了原作者的版權，請告知一經查實，將立刻刪除涉嫌侵權內容，聯系我們QQ:712375056，同時歡迎投稿傳遞力量。
Copyright ? 2009-2022 56dr.com. All Rights Reserved. 特網科技 特網云 版權所有 特網科技 粵ICP備16109289號
域名注冊服務機構:阿里云計算有限公司（萬網） 域名服務機構：煙臺帝思普網絡(luò )科技有限公司（DNSPod） CDN服務：阿里云計算有限公司 百度云 中國互聯網舉報中心 增值電信業務經營許可證B2
建議您使用Chrome、Firefox、Edge、IE10及以上版本和360等主流瀏覽器瀏覽本網站
